Page 12 - Everlasy Catalog English

HYDRÁULIC OIL PREMIUM AW HYDRAULIC - ISO 32, 46, 68, 100, 150
PREMIUM AW HYDRAULIC OILS are premium-quality anti-wear hydraulic oils with superior stability, deigned to meet the rigorous requirements of most major manufacturers and users of hydraulic equipment. It has an outstanding rust protection, low deposit formation, good demulsibility, rapid release of entrained air, oxidation resistance, low pour points and good anti- foam properties 3,000 hour.
PREMIUM AW HYDRAULIC OILS contain an anti-wear agent that helps minimize wear in high-speed, highpressure vane and gear pumps.
PREMIUM AW HYDRAULIC OILS are recommended for use in vane, gear and piston pumps operated above 3000 psi. These products are excellent to reduce vane and gear pump wear and greatly extend the life of systems operating at high loads, speeds and temperatures.
BENEFITS
• Low Foaming
• Extended system life
• Long-term thermal stability
• Long-term hydrolytic stability
• Superior demulsibility
• Protection against wear, rust and corrosion
• Excellent oxidation resistance over long service periods
19 L 200 L 1000 L
HIGH PERFORMANCE | HYDRAULIC - ISO 32, 46, 68,100
HYDRAULIC OILS are made to be used in a wide variety of applications where moderately inhibited oils are required.
HYDRAULIC OILS are suitable in pump, compressor and circulating systems, 5000 hours.
BENEFITS
• Exhibit outstanding high temperature performance providing an extra margin of equipment protection.
• Excellent oxidation resistance and thermal stability properties that could extend oil and filter change intervals and help to provide exceptionally clean systems and trouble-free operation.
• High level of anti-wear properties and excellent film strength characteristics can lead to exceptional equipment performance
• Work well in systems contaminated with small amounts of water, however, separate large amounts of water easily.
TYPICAL PHYSICAL CHARACTERISTICS
SPECIFICATIONS / ESPECIFICACIONES
ISO 32
ISO 46
ISO 68
ISO 100
ISO 150
VISCOSITY @ 100 °C VISCOSITY INDEX VISCOSITY CST@100C
5.3 6.9 100 102 1.0 1.0
8.9 101 1.5
11.1 14.5 95 95 1.5 2.5
VISCOSITY @ 40 °C
31.3
47.3
69.5
100
150
POUR POINT
-30
-30
-35
-15
-15
TYPICAL PHYSICAL CHARACTERISTICS
SPECIFICATIONS / ESPECIFICACIONES
ISO 32
ISO 46
ISO 68
SAE GRADE APPROX. FLASH POINT C. RUST TEST
POUR POINT, C
19 L
10 200 PASS -12
20 20 200 210 PASS PASS -12 -9
API GRAVITY
22.5
22.0
22.0
VISCOSITY CST@40C
28.8
42.6
63.0
VISCOSITY INDEX MINIMUM
95
95
95
13 | www.everlastlubricantsusa.com
200 L
1000 L